901, Repulpable Single-Coated Splicing Tape, 3M, adhesive tape datasheet

Home >

3M 901
Repulpable Single-Coated Splicing Tape

General Information

3M901 is a semi-bleached kraft paper coated with a light green repulpable adhesive.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
Flatback Paper		4.00 mil	PVC Translucent Red Film (non-repulpable)

Adhesion to Steel 180° Peel	Adhesive Activation	Tensile Strength	Elongation Percent
	Pressure	25.00 lbs/in

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
40 °F	0 °F	400 °F

Adhesive Tape Features

Repulpable tape construction
Heat-resistant adhesive
No need to remove splice from waste
Prevents contamination of paper mill broke by non-repulpable splice material
Reduces splice failure due to high drying oven temperatures
Tensile strength: 12 ils./in.
Light green repulpable adhesive
Helps save labor
Helps increase value of scrap
Helps save money by reducing down time

Adhesive Tape Applications

Butt splice
Tape down leading or trailing end of paper on an overlap splice such as that required on a web off-set splice

Adhesive Tape Markets Served

Adhesive Tape Colors

Comparable products

3M 901

Repulpable Single-Coated Splicing Tape

Backing	Adhesive	Thickness	Adhesion
Flatback Paper		4.00mil	oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

tesa tape inc 4441

Repulpable, Single Faced Splicing Tape

Backing	Adhesive	Thickness	Adhesion
Crepe Paper	Acrylic	5.00mil	32.00oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

tesa tape inc 51912

Repulpable, Double Coated Splicing Tape

Backing	Adhesive	Thickness	Adhesion
Non-Woven	Acrylic	3.50mil	oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.