Call 800-282-0090


6969
HighlandT Brand Colored Cloth Duct Tape



General Information
A polyethylene coated cloth tape to be used for moisture proofing, duct sealing, protecting and general purpose.
Backing Adhesive
(unwind)
Thickness
(total)
Liner Type
(outer)
Polyethylene Coated Cloth Rubber 10.80 mil  
Adhesion to Steel
180° Peel
Adhesive Activation Tensile Strength Elongation Percent
73.00 oz/in Pressure 29.00 lbs/in 12.00%
Min Application
Temp
Min Service
Temp
Max Short-Term
Temp
Max Long-Term
Temp
       
Adhesive Tape Features
Adhesive Tape Applications
  • Moisture proofing
  • Duct sealing
  • Protecting
  • General purpose
Adhesive Tape Markets Served
Adhesive Tape Colors
  • Black
  • Blue
  • Olive drab
  • Red
  • Silver
  • White
  • Yellow
Comparable products
Backing Adhesive Thickness Adhesion
 Polyethylene Coated Cloth   Rubber   10.80mil   73.00oz/in 
Backing Adhesive Thickness Adhesion
 Polyethylene Coated Cloth   Rubber   10.00mil   55.00oz/in 
Backing Adhesive Thickness Adhesion
 Polyethylene Coated Cloth   Rubber   10.50mil   45.00oz/in 
Backing Adhesive Thickness Adhesion
 Polyethylene Coated Cloth   Rubber   10.00mil   48.00oz/in 
Backing Adhesive Thickness Adhesion
 UPVC - Unplasticized Polyvinylchloride   Rubber   2.30mil   43.00oz/in 
Backing Adhesive Thickness Adhesion
 Polyethylene Coated Cloth   Rubber   10.00mil   50.00oz/in 
Backing Adhesive Thickness Adhesion
 Polyethylene Coated Cloth   Rubber   10.00mil   50.00oz/in 
Backing Adhesive Thickness Adhesion
 Polyethylene Coated Cloth   Rubber   10.20mil   39.00oz/in 

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.


Choose the surface energy of the exact surface that the adhesive will contact (e.g. if the part was painted metal, paint would be the surface energy).