Budnick Converting ®
3M
616
Lithographers Tape (Ruby Red)
A 2.4 mil. ruby red translucent tape which is optically transparent and photographically opaque. Storage is not recommended to exceed 12 months under normal conditions at 70°F and 50% relative humidity. Tape is qualified to meet military spec. MIL-T-40620A.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | UPVC - Unplasticized Polyvinylchloride |
|---|---|
| Adhesive | Rubber |
| Thickness | 2.4 Mils |
| Tensile | 29.00 lbs/in |
|---|---|
| Elongation | 50.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 36 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Ruby red tape
- Low caliper and pin-hole free backing
- Firm rubber adhesive
- Optically transparent
- Resists affects of changing atmospheric conditions
- Minimizes ghosting
- Long aging and resistant to softening
- Ruby Red "Paklon"™ UPVC film backing
- Allows accurate positioning
- Allows repeated and extended "burn" times
- Provides sharper definition
- Minimizes retouching
- Resists oozing during application and storage
- Provides continuous opacity to light source
Adhesive Tape Applications
- Opaquing
- Stripping
- Edging
- Splicing
Adhesive Tape Colors
- Red
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.