5702, Safety Stripe Tape, 3M, adhesive tape datasheet

Home >

3M 5702
Safety Stripe Tape

General Information

A 5.4 mil. tape consisting of vinyl backing and rubber adhesive used for safety markings such as identifing traffic areas and physical hazards. 5702 resists most common solvents, but care must be taken to avoid ketones, ester and chlorinated hydrocarbons, which may cause the backing to swell or degrade in the intended product application. Avoid using this tape on highly plastizied materials which may result in adhesive softening and subsequent adhesion failure of tape.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
PVC - Polyvinylchloride	Rubber	5.40 mil

Adhesion to Steel 180° Peel	Adhesive Activation	Tensile Strength	Elongation Percent
19.00 oz/in	Pressure	15.00 lbs/in	170.00%

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
60 °F	0 °F	170 °F

Adhesive Tape Features

4.2 mil. polyvinylchloride tranparent backing
1.2 mil. rubber adhesive
Black and yellow striped backing
Clear vinyl over colored stripes protects stripes from abrasion
Promotes awareness of hazardous areas
Longer life than many surface printed products
Long expected life before re-taping
Resists snagging often associated with thicker products

Adhesive Tape Applications

Excellent for many lane and safety marking applications
Identifies hazardous areas

Adhesive Tape Markets Served

Adhesive Tape Colors

Comparable products

3M 5702

Safety Stripe Tape

Backing	Adhesive	Thickness	Adhesion
PVC - Polyvinylchloride	Rubber	5.40mil	19.00oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Permacel/Nitto Denko America P421

5-Mil PTFE Film Tape

Backing	Adhesive	Thickness	Adhesion
PTFE - Skived	Silicone	6.50mil	25.00oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Shurtape Technologies Inc VP415

SPVC Film Tape

Backing	Adhesive	Thickness	Adhesion
PVC - Polyvinylchloride	Rubber	7.00mil	16.00oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.