Budnick Converting ®
3M
443PC
***Discontinued*** Double Coated Tape
Discontinued 443PC is a 5.11mil, high tack rubber, double coated polyester tape, primarily used in a variety of plastic adhesion applications. It features high tack synthetic rubber adhesives which provide excellent quick stick or initial adhesion. It also has a film carrier, which can add dimensional stability for aid in removal. The carrier also provides easier handling during slitting and die-cutting.
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PET - Polyester |
|---|---|
| Adhesive | Rubber |
| Thickness | 5.11 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesion (liner) | 84.95 oz/in |
| Adhesion (unwind) | 84.95 oz/in |
| Min. Application Temp | 70° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 158° F |
| Max Long-Term Temp | 180° F |
Product Features
- Liner=Paper (62# polycoated tan kraft)
- High tack
- Quick stick
Adhesive Tape Applications
- Splicing of paper and plastic films
- Holding grinding and polishing pads
- Mounting photopolymer printing plates
- Holding objects where high shear forces are encountered
- Miscellaneous joining and holding uses where high initial tack is required
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.