Call 800-282-0090


Home > Data Sheet
3M 413DL
Flexomount™ Solid Printing Tape

General Information
413DL is a black double coated flexographic mounting tape with a firm rubber adhesive on each side of a vinyl carrier. This tape offers lower adhesion, higher temperature and solvent resistance, and helps minimize pin holing on solids. Double Linered.
Backing Adhesive
(unwind)
Thickness
(total)
Liner Type
(outer)
  Rubber 1.50 mil  

Adhesion to Steel
180° Peel
adhesion to steel 180° peel - liner side Tensile Strength Elongation Percent
       

Min Application
Temp
Min Service
Temp
Max Short-Term
Temp
Max Long-Term
Temp
       
Adhesive Tape Features
  • Firm rubber adhesive
  • Vinyl carrier
  • Low adhesion
  • High temperature and solvent resistance
  • Helps minimize pin holing on solids
  • Double linered product
Adhesive Tape Applications
  • Flexographic solid printing
Adhesive Tape Markets Served
  • Commercial printing
Adhesive Tape Colors
  • Black

Comparable products
Backing Adhesive Thickness Adhesion
    Rubber   1.50mil   oz/in 

Edit

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Backing Adhesive Thickness Adhesion
 Uncoated Cloth   Rubber   15.40mil   73.10oz/in 

Edit

Pricing Popup Link: javascript:showProductDialog(79, true);

Recommended Rank: 65

Backing Adhesive Thickness Adhesion
 Uncoated Cloth      15.00mil   45.00oz/in 

Edit

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options
Converting Services
Budnick Converting offers a number of services to take the product you need and make it perfect for your application.  With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up. 
Services
Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.