Budnick Converting ®
3M
411DL
FlexomountT Solid Printing Tape
411DL is a 1.5 mil gray double coated tape with a soft rubber adhesive on each side of a vinyl carrier. The adhesive system has been developed for bonding to both photopolymer or rubber printing plates. This product is designed for solid and line work. The non-compressible vinyl carrier provides the consistent solid ink coverage required for this type of work. Available in Single and Double Liner
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PVC - Polyvinylchloride |
|---|---|
| Adhesive | Rubber |
| Thickness | 1.5 Mils |
| Tensile | |
|---|---|
| Elongation | |
| Adhesion (liner) | |
| Adhesion (unwind) | 50 oz/in |
| Min. Application Temp | |
|---|---|
| Min. Service Temp | |
| Max Short-Term Temp | |
| Max Long-Term Temp |
Product Features
- Excellent adhesion to both rubber and photopolymer plates
- High adhesion makes it a good choice for long runs and helps reduce tendency for plate edge lifting.
Adhesive Tape Applications
- Designed for solid and line work
- The non-compressible vinyl carrier provides the consistent solid ink coverage required for this type of work.
Adhesive Tape Colors
- Gray
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.