3903, Vinyl Duct Tape, 3M, adhesive tape datasheet

Home >

3M 3903
Vinyl Duct Tape

General Information

3903 is a 6.3 mil, vinyl duct tape. It is primarily used in applications requiring low flame spread and smoke developed indices. It can also be used in applications requiring low leachable halogens, sulfur and mercury.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
Vinyl Coated Cloth	Rubber	6.30 mil

Adhesion to Steel 180° Peel	Adhesive Activation	Tensile Strength	Elongation Percent
20.00 oz/in	Pressure	14.00 lbs/in	150.00%

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
60 °F	0 °F	250 °F

Adhesive Tape Features

Outdoor use (UV resistance): Black - up to 6 months G90 Cycle 3; green, red, yellow - up to 1 month G90 Cycle 3
Burn Characteristics: flame spread index - 5 - E-84 (UL 723); smoke developed index - 0 - E-84 (UL 723)
Leachables: Halogens and sulfur < 250 ppm - Mil std. 2041C; Mercury < 10 ppm - Mil std. 2041C
Easy to tear straight by hand
Excellent conformability
Contains no cloth scrim
Lower unwind force
Seven backing colors
Adhesive releases when accidently stuck to itself
Adhesive transfer resistance
Adhesive and backing will perform well and remove cleanly from surface after 1 hour at 250°F
Performs well when exposed to outdoor conditions, less prone to leave adhesive residue
Heat resistance
Saves time, no additional tools needed, minimizes waste
Conforms to the surface to which it is applied
No exposed thread ends to wick water into the adhesive layer
Less effort to remove tape from roll, lesser user fatigue
Color-coding, easy on-site identification
Less waste
Minimal clean-up
Can be used in a wide variety of applications, less time spent on clean-up

Adhesive Tape Applications

Adhesive Tape Markets Served

Adhesive Tape Colors

Black
Blue
Green
Gray
Red
White
Yellow

Comparable products

3M 3903

Vinyl Duct Tape

Backing	Adhesive	Thickness	Adhesion
Vinyl Coated Cloth	Rubber	6.30mil	20.00oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.