3675, ***Discontinued*** Flame Retardant Glass Cloth, 3M, adhesive tape datasheet

Home >

3M 3675
***Discontinued*** Flame Retardant Glass Cloth

General Information

***3M discontinued this product see Compar-A-Tape*** An 8.0 mil. glass cloth for sealing seams on aircraft ducting and cargo area panels. Tape meets the government specs. for flame retardency. Acrylic adhesive has excellent long aging properties ideal for many permanent applications. Store in a clean dry place at 60 - 80°F and 40 - 50% relative humidity no longer than 12 months from date of manufacture.

Backing	Adhesive (unwind)	Thickness (total)	Liner Type (outer)
Silicone Resin Coated Glass	Acrylic	8.00 mil	Polyethylene Film (blue, HD)

Adhesion to Steel 180° Peel	Adhesive Activation	Tensile Strength	Elongation Percent
40.00 oz/in	Pressure	150.00 lbs/in	8.00%

Min Application Temp	Min Service Temp	Max Short-Term Temp	Max Long-Term Temp
50 °F	-20 °F	250 °F

Adhesive Tape Features

Glass cloth backing
Acrylic adhesive
Flame retardant
High tensile strength
Conformable to smooth curves
Long aging
Good holding power
Meets government flame retardancy specification F.A.R. Part 25.853(a) and F.A.R. Part 25.855(d)
Provides permanent seal
Fast application to help increase productivity
Does not support flame

Adhesive Tape Applications

Sealing thermal and acoustic insulation panels where high adhesion and flame retardancy are needed

Adhesive Tape Markets Served

Adhesive Tape Colors

White

Comparable products

3M 3675

***Discontinued*** Flame Retardant Glass Cloth

Backing	Adhesive	Thickness	Adhesion
Silicone Resin Coated Glass	Acrylic	8.00mil	40.00oz/in

Edit

Is Featured

Pricing Popup Link: <Not Available>

Recommended Rank: 3

Converting Options

Converting Services

Budnick Converting offers a number of services to take the product you need and make it perfect for your application. With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up.

Services

Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

Next Steps

Learn More About Budnick

Contact Us

View Case Studies

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.