Budnick Converting ®
3M
33+
Vinyl Electrical Tape
3M 33+ vinyl electrical tape is a premium grade, 7 mil thick, all weather vinyl insulating tape. It is designed to perform continuously in ambient temperatures up to 220°F. The tape is conformable for cold weather application down to 0°F. It has excellent resistance to abrasion, moisture, alkalies, acids, corrosion and varying weather conditions (including ultraviolet exposure). The combination of elastic backing and aggressive adhesive provides moisture tight electrical and mechanical protection with minimum bulk. Super 33+ is an Underwriters' Laboratories Listed and Canadian Standards Association Certified "Insulating Tape".
Converting Services
- Precision Cutting
- Die Cutting
- Slitting
- Printing
- Laminating and Coating
- Spooling and Finishing
- Consulting & Process Audit
- Prototyping
- Inventory Management
At Budnick, we specialize in custom converting these materials into labor saving, user-friendly parts.
| Backing/Carrier | PVC - Polyvinylchloride |
|---|---|
| Adhesive | Rubber |
| Thickness | 7 Mils |
| Tensile | 15.00 lbs/in |
|---|---|
| Elongation | 250.00% |
| Adhesive Activation | Pressure |
| Adhesion (unwind) | 28 oz/in |
| Min. Application Temp | 50° F |
|---|---|
| Min. Service Temp | 0° F |
| Max Short-Term Temp | 176° F |
| Max Long-Term Temp | 105° F |
Product Features
- UL Listed; UL 510 Standard "Insulating Tape" (product category OANZ), FileE129200
- CSA certification; Standard C22.2 No. 197-M1983 File LR 48769
- Flammability UL510 is 1 sec & ASTM D1000 is 4 sec
- Accelerated Aging is 80%
- Flagging is < 0.1 inch
- Telescoping is <0.1 inch over 24 hours @ 120°F
- Voltage Rating UL510 is 600 volts
- Insulation Resistance >1 x 10^6 megohms
- Compatible with solid dielelctric cable insulations
- Compatible with rubber & synthetic splicing compounds, polyurethane resins
- Inhibits corrosion of electrical conductors
Adhesive Tape Applications
- For indoor or outdoor applications
- Primary electrical insulation for all wire and cable splices rated up to 600 volts & 220°F
- Primary electrical insulation for 600 volt bus applications & protective jacketing for low and high voltage bus
- Harnessing of wires & cables
Comparable Products
Data provided by Budnick Converting, Inc.
The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.
Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.
Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.