Converting Ideas into Solutions ®

3M
2307

General Purpose Masking Tape

3M masking tape 2307 is a 5.2 mil general purpose masking tape for holding, bundling, sealing, general paint masking and a vast number of other applications where a pressure sensitive tape is needed. 2307 is a Class III (Bronze) masking tape with clean removal used for light duty bundling, attaching, and labeling. 2307 uses a solvent free manufacturing process. In addition, this product meets the heavy metals content as stated in Article 11 of European Directive 94/62/EC on packaging and packaging waste and the laws based on CONEG model legislation.

Backing/Carrier Crepe Paper
Adhesive Rubber
Thickness 5.2 Mils
Tensile 23.00 lbs/in
Elongation 8.00%
Adhesive Activation Pressure
Adhesion (unwind) 28 oz/in
Min. Application Temp 50° F
Min. Service Temp 0° F
Max Short-Term Temp 200° F
Max Long-Term Temp

Product Features

  • Hand tearable crepe paper backing is treated to resist slivering on removal
  • Not suitable for outdoor exposure
  • Very conformable, maintaining integrity when formed around a corner
  • Instant adhesion, allowing tape to stick easily
  • Resists paint bleed-through
  • Good holding power resists lifting or curling
  • Clean removal
  • Class III (Bronze) masking tape
  • Can be qualified to meet Federal Specification PPP-T-42C Type I, CID-A-A-883 Type I

Markets Served

  • Commercial

Adhesive Tape Applications

  • Light Bundling
  • Sealing
  • Attaching
  • Labeling
  • Paint Masking
  • SUITABLE FOR:
  • Stainless steel
  • Most powder coated paints

Adhesive Tape Colors

  • Cream

Data provided by Budnick Converting, Inc.

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.

Request More Information

For decades Budnick has provided customized solutions for specialty adhesive applications designed specifically for manufacturers. Whether you're looking to speed up production, improve product performance, or protect your products during transport, Budnick has a solution for your needs!