Call 800-282-0090


Home > Data Sheet
3M 218
Fine Line Tape

General Information
3M masking tape 218 is a 4.8 mil. high-performance film backed tape with low profile and high adhesion for excellent paint lines and other masking and holding applications. Rubber adhesive has an ideal balance of properties for masking use. Tape also has a green matte finish. 218 gives an excellent color line separation due to its thinness. Backing is specially processed to strech easily for smooth curves, yet can be easily torn by hand with a quick tearing action. Backing will also allow taping over fresh paint sooner than paper tapes with less chance of imprint damage. Tape has excellent moisture and solvent resistance. 218 is not considered a high temperature tape but could be used on bake cycles up to 250°F for up to 30 minutes. This product should not be subjected to outdoor exposure or prolonged periods of sunlight. Tape may become very difficult to remove. 218 is quilified to meet military spec. and is manufactured in an ISO 9002 registered plant to meet ISO quality standards.
Backing Adhesive
(unwind)
Thickness
(total)
Liner Type
(outer)
PP - Polypropylene Rubber 4.80 mil  

Adhesion to Steel
180° Peel
Adhesive Activation Tensile Strength Elongation Percent
39.00 oz/in Pressure 13.00 lbs/in 490.00%

Min Application
Temp
Min Service
Temp
Max Short-Term
Temp
Max Long-Term
Temp
50 °F 0 °F 250 °F  
Adhesive Tape Features
  • Film backing
  • Conformable to curves with smoothness
  • Easy hand tear
  • Excellent moisture resistance
  • Excellent solvent resistance
  • Good paint anchorage
  • Instant adhesion
  • Good holding power
  • Controlled unwind
  • Matte finish
  • Resists lifting or curling
  • Minimizes chance of imprint damage
  • Minimum paint edge build-up
  • Prevents bleed-through
  • Easy handling
  • Resists flaking and paint runs
  • Adheres easily
  • Clean removal
Adhesive Tape Applications
  • Fine line paint masking
  • Circuit board coat masking
  • Electroplating masking
  • Moisture resistant masking
  • Can sealing
  • Solvent resistant masking
  • Silk screen masking
  • Lettering and labeling
Adhesive Tape Markets Served
Adhesive Tape Colors
  • Green

Comparable products
Backing Adhesive Thickness Adhesion
 PP - Polypropylene   Rubber   4.80mil   39.00oz/in 

Edit

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Backing Adhesive Thickness Adhesion
 PVC - Polyvinylchloride   Rubber   4.30mil   31.00oz/in 

Edit

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Backing Adhesive Thickness Adhesion
 PP - Polypropylene   Rubber   3.10mil   18.00oz/in 

Edit

Pricing Popup Link: <Not Available>

Recommended Rank: 25

Converting Options
Converting Services
Budnick Converting offers a number of services to take the product you need and make it perfect for your application.  With converting methods ranging from precision slitting or die-cutting to printing and coating, Budnick has the capabilities to create anything you can dream up. 
Services
Precision Cutting

Die-Cutting

Slitting

Printing

Adhesive Coating

Finishing and Spooling

The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty.

It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil.

Shelf life from date of manufacture is based on the product being stored at 70°F(21°C) / 50% relative humidity out of direct sunlight.

Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.